25.
Which kVp numbers do you use for the kVp compensation test?
__________________________________________________.
26.
Where do you measure the density for the kVp compensation test?
__________________________________________________.
27.
up as in the ______________________________ test.
28.
For the field sensitivity-matching test, the results on individual field
measurements should be within _______________ percent of the average
measurements.
29.
Why do you place a lead number on the phantom for the density control function
test?
__________________________________________________ .
30.
For the density control function test, if the kVp is constant, the exposure time
should _______________________ with increased phantom thickness.
31.
Where do you position the lead beam for the backup timer test?
__________________________________________________.
32.
For the backup timer test, routinely, how often should the timer system be
checked?
_________________________________________________.
MD0062
4-43