8.
If today's number is outside the established limits, what do you do?
_______________________________________________________________.
9.
Repeat the procedure in areas of speed, contrast, fog, and
______________________ ___________________________________.
10.
How often should you perform this test?
_______________________________________________________________.
Exercises 11 through 15 pertain to the safelight test.
11.
The purpose of the safelight test is to eliminate any potential source of
___________________________in the darkroom.
12.
To perform the safelight test you need a 10- x 12-inch cassette, unloaded, some
opaque material, and ____________________________. (one more item)
13.
After turning off all white and safelights in the darkroom, what do you do next?
____________________________________________________________.
14.
How many times do you expose the film to the safelight?
____________________________________________________________.
15.
The density differences between the fogged and unfogged areas on the
radiographic film should not exceed 0.5 for a ___________________________
(time) exposure.
Exercises 16 through 20 pertain to the darkroom assurance light leak test.
16.
You check the darkroom area for light leaks because they could
_______________ the radiographic films.
MD0062
7-15