APPENDIX D
INDUSTRIAL HYGIENE SAMPLING GUIDE INSTRUCTION FOR
SUBMISSION OF INDUSTRIAL HYGIENE AIR SAMPLES
1.
Fill out the Sample Data Sheet completely.
Requestor is to fill in columns b, c, d (optional), e or f, g, h, and i.
2.
3.
Number all samples and blanks using consecutive numbers.
4.
A "blank" MUST accompany ALL air samples. The "blank" is to be numbered and
the word "BLANK" written on the tube, filter, bottle, passive monitor or impinger.
Indicate on the form the "blank" sample number.
5.
All samples are to be forwarded to:
Commander
U.S. Army Environmental Hygiene Agency
ATTN: HSHB─ML-A, Bldg E-2100
Aberdeen Proving Ground, MD 21010-5422
NOTE:
Bulk Sample Data (AEHA Form 8) or Air Sample Data (AEHA Form 9) is to
accompany all industrial hygiene samples submitted for analysis.
NOTE:
Request for additional forms should be submitted to:
Commander
U.S. Army Environmental Hygiene Agency
ATTN: HSHB─ML-A
Aberdeen Proving Ground, MD 21010-5422
or
Locally reproduce
6.
Refer to the following table for specific sampling instructions.
MD0165
D-1