4.
You are performing a table-operations check. You press and hold the
Trendelenburg tilt switch until the table reaches its maximum travel. What is the
table's position?
a. Level, 30 inches from center.
b. Head end 12 degrees down.
c.
Foot end 88 degrees down.
d. Head end 12 degrees up.
5.
You are checking the generator's line-set adjustment. You are preparing to make
a two-second test exposure at the 100L station. What voltage will you set?
a. 78kvp.
b. 30kvp.
c.
25kvp.
d. 100kvp.
6.
How often is PMCS performed on the collimator?
a. Weekly.
b. Monthly.
c.
Quarterly.
d. Annually.
MD0351
1-50