(ac) Block 16a, Remarks.
1 The owning unit will put its point of contact telephone number in
this block.
2 If the fault makes the reportable equipment or systems NMC,
print NMC in the right corner.
3 Support maintenance uses this block to note any items listed,
but not received and to note the status of equipment. Not Mission Capable/Maintenance
and NMCS time for items reportable on the DA Form 2406 will be noted here. Components
and subsystems or reportable items will also have NMC time noted. Support will show
starting and stopping days for both NMCM and NMCS.
4 When the item in block 3 needs "onsite" or "deferred" repairs,
support will note that action here. One of the following entries will be made for onsite or
deferred work.
a Maintenance request received on (date).
b Onsite repair scheduled for (date).
c Owner to return item on (date) for repair.
5 Block 24, Received by. Refer to figure 1-8. Filled in by support
only when the onsite repair is started or the deferred item is brought back to support.
Figure 1-8. DA Form 2407, Maintenance Request (bottom).
6 The unit commander or his or her designated representative will
note the time and date support was told onsite repair was needed on an NMC item.
NMCM time will be based on this date and time.
7 Send the receipt copy to the support unit. The owning unit
keeps all other copies until on-site repair is started or the deferred item is taken back to
support.
8 Enter the name of the manufacturer and the quantity of the item
submitted.
MD0358
1-15