3.
What is the purpose of the power sharing circuit on the AFP 14-X3?
a. To prevent both the developer and dryer heater from being turned on
simultaneously.
b. To provide preferential heating to the dryer during start-up.
c.
To provide replenishment to the developer and fixer when necessary.
d. To ensure that neither the developer or dryer heaters overheat.
4.
Which of the following statements is true about removing and replacing or
repairing a solution rack for the AFP 14-X3?
a. Remove and work of all solution racks at the same time.
b. Always place the shoe assemblies in the rack so the ribs point in the direction
of film travel.
c.
Place all cranks and links in the up position before installing the moving plate.
d. You can always interchange parts from one rack to every other rack.
5.
Which of the following is the first step in removing the developer heater for the
AFP 14-X3?
a. Disconnect the power to the machine.
b. Unscrew the heating element from the heat tube.
c.
Drain the tank.
d. Disconnect the heater wires from the terminal strip.
MD0359
4-31