4.
In the space-charge-compensation circuit, what voltage will be read at TP4 at
78kvp?
a. 78kvp.
b. 78 volts.
c.
0 volts.
d. 24vdc.
5.
Refer to figure 2-8. What is the resistance of R12?
a. 820Ω.
b. 10K.
c.
1.5K.
d. 100Ω.
6.
What determines the voltage across the impulse-timer deck?
a. The time-selector switch.
b. The single-phase impulse timer circuit.
c.
The ma station selected.
d. The short-time-adjust pot (P2).
7.
Why must the connection between HF and H3 be made manually?
a. Continuous rotation of the under-table tube is highly recommended whenever
it is in use.
b. Because it removes the stator voltage at the end of the exposure.
c.
Due to its proximity to lead FE and the tube-select relay.
d. If lead FE is low the over-table tube is selected.
MD0351
2-46