c. Remove the CRT.
CAUTION:
The high voltage connector cable may have a residual charge and should
be discharged to the chassis through a high resistance.
(1)
Disconnect the high voltage connector (2nd anode) as shown in figure 2-6.
Figure 2-6. Location of CRT high voltage connector.
(2)
Disconnect the CRT socket (figure 2-7).
(3)
Remove the two chassis screws holding the grounding wire form (figure
2-7).
(4)
Remove the CRT assembly.
Figure 2-7. CRT socket disconnect.
MD0362
2-50