4.
Make an approximate 2- to 2
1/2-inch fold back from the corner's
end toward you. Do not uncover
any portion of the article.
5.
Next, fold one side of the wrapper
firmly, without changing the shape
of the article, over and parallel to
the article. Then, fold back the end
of this corner approximately 2 to 2
1/2 inches while maintaining the
tension throughout
6.
Repeat step 5 on the opposite side.
The center folds must overlap at
least 1/2 inch at the center when
finished.
Figure 3-15. Applying packaging (continued).
MD0937
3-26