(2)
Position the hole in the plate to be coincident with the central ray.
f. Select the most commonly used:
(1)
Tomographic motion.
(2)
Exposure angle.
(3)
Sweep speed.
g. Record the information on the data form.
h. Select an indicator level of 12 cm (see figure 6-7).
Figure 6-7. Cut level indicator set at 12 cm.
i. Set the control panel:
(1)
60 kVp.
(2)
100 mAs approximately.
j.
Record the information on the data form.
MD0062
6-11
Previous Page
