┌────────────────┬──────────────────┬───────────────────────────┐
│ Problem
│ Potential Cause │ Corrective Action
│
╞════════════════╪══════════════════╪═══════════════════════════╡
│ Blender alarm │ Pressure
│ Adjust both source-gas
│
│ sounds.
│ differential
│ pressures to approximately│
│
│ between source
│ 50psi, but not below
│
│
│ gases exceeds
│ 48psi.
│
│
│ 20psi.
│
│
│
├──────────────────┼───────────────────────────┤
│
│ Water condensate │ Protect air source from
│
│
│ in air supply.
│ water condensate (install │
│
│
│ drier, etc.). Disassemble,│
│
│
│ clean, assemble, and
│
│
│
│ calibrate blender to
│
│
│
│ restore function.
│
│
├──────────────────┼───────────────────────────┤
│
│ Source-gas hose │ Obvious.
│
│
│ blocked, kinked. │
│
└────────────────┴──────────────────┴───────────────────────────┘
Table 2-16. Troubleshooting at start up in either mode (continued).
MD0355
2-32