(e) Medical logistics operation readiness float (ORF) primary planning report
(5). This function allows you to display and/or print a report listing all pieces of
equipment identified in the supported-customer file with a readiness code of "A"
(f) Medical ORF secondary planning report (6). Menu function 6
allows you to display and/or print a report listing all pieces of equipment identified in the
supported-customer file with a readiness code other than "A" (secondary items).
e. Supply Management (2). This menu option on the main maintenance
management menu (3.3) gives you access to a wide variety of submenus used to
manage supplies. The major functions that are accessed from the Supply Management
menu (3.3.2) are: maintain local stocked items and levels, display/update due-in status,
prepare supply actions for supplier, load/process file from supplier, enter materiel
receipts, print/display supply management reports, process/update maintenance
catalog. Refer to figure 4-5 to see all the menu options available from the supply
management menu 3.3.2.
f. Periodic Processing and Reporting (3). This menu option on the main
maintenance management menu (3.3) allows you to display, print, and in some cases
send periodic reports of interest to command units. It also allows you to process certain
information periodically. The selection of this function takes you to submenu 3.3.3
(shown in figure 4-6) which contains the following functions.
(1) Maintenance performance report (1). Use this option to display and print
a local performance report containing statistical data used to measure how well the local
unit is performing its medical maintenance support mission.
(2) DA-2406 report preparation (2). Menu function 2 allows you choose
submenu 126.96.36.199 to prepare a report equivalent to the DA-2406 (Materiel Condition
Status Report), which lists all reportable equipment, lists on-hand levels, and identifies
reportable equipment currently NMC.
(3) Command and control (C2) reporting (3). Use this function to choose
submenu 188.8.131.52 to prepare reports of interest to command units to be sent to the
appropriate command level.
(4) Perform monthly summary/purge (4). Selection of the final item of menu
3.3.3 summarizes local materiel-usage data associated with work orders which have
been completed for a number of days and which exceed the system-purge criteria
established during system setup. It then removes the detailed records for these
completed work orders and records for other transactions whose age and status
indicate they are no longer useful.