(c)
Remove the top cover, the splash guard, and all cross-over
assemblies.
1 Clean the top cover by wiping it off with a clean, damp cloth.
2 Thoroughly rinse all of the removed parts with warm water, and
allow the splash guard and cross-over assemblies to dry overnight outside of the
processor. See figure 1-2.
Figure 1-2. Top view, cover removed.
3 Wipe off any solution deposits from the exposed developer and
fixer roller surfaces. Use separate, clean, damp cloths for each rack to prevent
(d) Wipe off the side panels, feed tray, receiving bin, and frame with a
damp cloth. Clean up any chemical splashes or spills.
MD0359
1-4