a. Lift Flap. Lift the pocket flap on the casualty's protective over-garment.
b. Insert 2-PAM Chloride Needle. Push the needle of the used 2-PAM chloride
autoinjector through the flap. Penetrate the flap from the back so that the point of the
needle will be pointing up and outside the flap.
c. Bend Needle. Bend the portion of the needle that penetrated the flap so that
it forms a hook.
d. Insert Atropine Needle. Push the needle of the used atropine autoinjector
through the flap in the same manner as the other autoinjector.
e. Bend Needle. Bend each needle to form a hook. Be careful not to tear
protective clothing/gloves when bending the needles.
f. Repeat Steps. Repeat steps b through e for the second and third
Mark I kits.
g. Insert CANA. Insert the used CANA injector side of the last used nerve
agent antidote.
h. Bend Needle. Bend the CANA needle the same as the six autoinjectors
(figure 2-9).
Figure 2-9. Pocket flap with used autoinjectors attached.
MD0534
2-14