(5) Place the glove's rolled cuff edge at the seam that connects the sleeve
to the gown cuff (see Figure 1-23). Grasp the bottom rolled cuff edge of the glove with
your thumb and index finger.
Figure 1-23. Positioning the glove on the gown sleeve. Note that the rolled edge of the
glove cuff is at the juncture of the gown cuff and sleeve. Note also the pinched place on
the gown sleeve indicating the point at which the specialist has grasped the cuff of the
glove between his thumb and index finger.
(6) While holding the glove's cuff edge with one hand, grasp the
uppermost edge of the glove's cuff with the opposite hand (see Figure 1-24). Take care
not to expose the bare fingers while doing this.
Figure 1-24. This is the correct method of grasping the glove's cuff edge from above
and below.
(7) Continuing to grasp the glove (see Figure 1-24); stretch the cuff of the
glove over the hand (see Figure 1-25).
MD0933
1-21