Figure 1-25. Stretching the glove's cuff over the hand.
(8) Using the opposite sleeve- covered hand, grasp both the glove cuff
and sleeve cuff seam and pull the glove onto the hand (see Figure 1-26). Pull any
excessive amount of gown sleeve from underneath the cuff of the glove.
Figure 1-26. Pulling the glove onto the hand.
(9) Using the hand that is now gloved, put on the second glove in the
same manner. When gloving is completed, no part of the skin has touched the outside
surface of the gloves. Check to make sure that each gown cuff is secured and covered
completely by the cuff of the glove (see Figure 1-27). Adjust the fingers of the glove as
necessary so that they fit snugly.