Exercises 6 through 10 pertain to the beam restriction adequacy test.
6
List three pieces of equipment needed to perform the beam restriction adequacy
test.
________________________________.
________________________________.
________________________________.
7.
Why do you place the 3/4-inch attenuator block on the tabletop?
__________________________________________________.
8.
By using maximum mA and high kVp you will _______________the needed
exposure time.
9.
The _________ area is the region actually exposed to radiation.
a. clear.
b. dark.
10.
Routinely, this beam restriction adequacy test must be repeated every ______
months.
Exercises 11 through 15 pertain to the focusing and resolution of the imaging
system.
11.
First, you place the fluoroscopic imaging assembly at __________________
height above the tabletop.
a. maximum
b. minimum
12.
Select_________ kVp fluoroscopic technique for the focusing and resolution of
the imaging system test.
MD0062
5-18