34.
The uniformity of tomographic exposure test requires a lead plate with a
____________ in the middle.
35.
In the uniformity test, there are different _________________patterns for different
machines.
36.
The thickness test requires what size cassette?
a. 10 x 12 inch.
b. 10 x 14 inch.
c.
14 x 17 inch.
37.
For the cut thickness test, using the system's centering light, you align the 12.5 cm
mark to coincide with the central ray, and you position the (three words)
_____________________________________________________________.
38.
Add two more pieces of equipment to the list below that the flatness of plane test
requires.
a. One 14- x 17-inch cassette.
b. Recording data forms.
c. _________________________________.
d. _________________________________.
39.
For the flatness of plane test, you adjust the beam restriction system to provide a
40.
What size cassette do you need to perform the resolution test?
__________________________________________________.
41.
Where do you place the test object in the resolution test?
__________________________________________________.
Check Your Answers on Next Page
MD0062
6-31