carried by one man. The instruction manual issued with the sets provides detailed
instructions, which enables the operator, with very little practice, to conduct the tests.
Figure 4-3. Water quality analysis set-preventive medicine.
(b) Water Quality Analysis or Control Sets--Preventive Medicine (see
figure 4-3). This set is designed for on-site monitoring of the quality of-raw water
sources, waste water effluents, and drinking water produced. A water testing kit,
bacteriological (see figure 4-2), is required for use with the WQAS-Preventive Medicine.
Its main components are:
1 Acidity test kit.
2 High-range chloride test kit.
3 Iron test kit.
4 Dissolved oxygen test kit.
5 Zinc test kit.
6 Multipurpose test spectrophotometic (fluoride, iron, nitrogen
ammonia, nitrate nitrogen, pH, sulfate, and turbidity tests).
(c) Water Quality Analysis or Control Sets--Engineer (see figure 4-4).
This set is designed to provide immediate information concerning the presence of
chemical contamination of water in order to determine the type of purification equipment
required and to monitor the equipment when installed. Its main components are:
MD0160
4-15