g. Side-to-Side Belt Replacement.
(1) Perform steps 3-6f (1) through (5) as detailed above in the procedure for
replacing the front-to-back belt.
(2)
Remove the front panel as outlined in the subparagraph above.
(3)
Loosen the tensioning pulley above the motor assembly.
(4) Locate the front-idler pulley in the access hole below the right-hand side
of the front panel. To determine the point of belt removal, see figure 3-1.
Figure 3-1. Front-idler pulley detail.
MD0351
3-16