LESSON ASSIGNMENT
LESSON 4
Perform Remove and Replace or Repair
Defective Components of the X-ray Film Processors.
TEXT ASSIGNMENT
Paragraphs 4-1 through 4-7.
TASKS TAUGHT
Perform Remove and Replace or Repair Defective
Components of the X-ray Film Processors.
LESSON OBJECTIVES
When you have completed this lesson, you should be
able to:
4-1.
Identify the cautions and warnings to observe
when removing and replacing or repairing
defective components in the AFP 14-X3 X-ray
and X-OMAT Film Processors.
4-2.
Identify the theory of operation for the AFP14X3
and the X-OMAT X-ray Film Processors.
4-3.
Identify the procedures required to remove and
replace or repair these defective AFP 14-X3
X-ray Film Processor components: solution
rack, circulation pump(s), wash tank fill solenoid,
drive motor, developer heater, developer
sensor, and dryer sensor.
4-4.
Identify the procedures required to remove and
replace or repair these defective X-OMAT X-ray
Film Processor components: wash rack
assembly chain, time-delay relay K2, developer
heater, and developer replenishment pump.
SUGGESTION
Work the lesson exercises at the end of this lesson
before beginning the next lesson. These exercises will
help you accomplish the lesson objectives.
MD0359
4-1