Figure 1-5. Squeegee roller adjustment.
NOTE:
Do not soak any of the rubber rollers in a systems cleaner. Use the systems
cleaner only as directed on the package label. Always rinse the processor
tanks and lines thoroughly several times after using a systems cleaner.
(g) Remove and clean the developer filter element and housing. See
(5) below.
(h) Rinse the replenisher tanks and lines with warm water.
(i)
Reinstall the racks, cross-overs, and splash guards.
(j) Remove the rear (lift-out) section of the dryer and wipe down the
entire dryer area with a damp cloth. Wipe down the dryer rollers with a damp cloth.
(k)
Vacuum out the entire dryer section.
(l)
Reinstall the lift-out dryer section.
(m) Wipe down the entire processor. Look for indications of leaks or
chemical residue build-up. Correct as necessary.
MD0359
1-9