(d) Sample Size--enter the sample size number from the sampling
tables (A, B, D, H, and I) (Tables 3-1, 3-2, 3-4, 3-8, and 3-9).
(e) Defect Class--list the defect class (i.e. MAJ A, MAJ B, and Minor)
from sampling tables (Tables A, B, D, H, and I) (Tables 3-1, 3-2, 3-4, 3-8, and 3-9).
(f) Action Number--enter the action numbers from the sampling
tables (Tables A, B, D, H, and I) (Tables 3-1, 3-2, 3-4, 3-8, and 3-9).
(g)
Total Defects--indicate the total number of defects noted for each
defect class.
(h) Defects By Component Classification--indicate the number of
defects noted by the type of component (Table M) (Table 3-13).
NOTE:
Table M, Component and Classification List (Table 3-13) can be found on
the Defense Supply Center Philadelphia website at
http://www.dscp.dla.mil/subs/support/qapubs/appa/table-m.pdf not in the
DSCP Handbook 4155.2, Appendix A).
(8)
In Part VII, Nonconformance Summary enter the following information:
(a)
Assembler Lot Number--list the lot number(s) affected.
(b)
Menu Noumber--list the menu number(s) affected.
(c) Component & Code--component abbreviation (Table M) (Table 3-
13) and Julian lot code from package.
(d) Component Processor--Component Contractor Abbreviation
(Table L) (Table 3-12).
NOTE:
Table L, Contractor Abbreviations (Table 3-12) can be found on the Defense
Supply Center Philadelphia website at
http://www.dscp.dla.mil/subs/support/qapubs/appa/table-l.pdf not in the DSCP
Handbook 4155.2, Appendix A.
(e) Defect Table--list the defect table used (Tables C, F, G, or J)
(Tables 3-3, 3-6, 3-7, or 3-10).
(f) Defect Number--list the defect number from the examination table
(Tables C, F, G, or J) (Tables 3-3, 3-6, 3-7, or 3-10).
(g)
Defect Code--list the specific Defect Code (Table K) (Table 3-11).
MD0718
3-30