Exercises 5 through 9 pertain to the exposure angle test.
The exposure angle test determines the exposure angle during a tomographic
exposure compared with the ___________________________exposure angle.
Place the x-ray tube at a perpendicular angle to the table when preparing to
perform the exposure angle test.
Where do you place the Plexiglas attenuator blocks?
The technique factors used and the tomographic parameters are recorded on the
data form and the _________________________________________________.
The symmetry of the exposure angle, about midline, should be within plus or
Exercises 10 through 14 pertain to the uniformity of tomographic exposure test
For the uniformity of tomographic exposure test, you need a Plexiglas spacer
block, a lead aperture plate with a hole in the middle, a recording data form,
and a ______________________________________.
Position the hole in the plate to be coincident with the
You select the most commonly used tomographic motion, exposure angle, and
A non-uniform image density indicates what kind of problem?