5.
Refer to Figure 1. What is the number of the strainer assembly?
a. 1.
b. 8.
c.
9.
d. 10.
6.
Refer to Figure 1. What is the number of the metering valve assembly?
a. 3.
b. 6.
c.
11.
d. 14.
7.
You are servicing the X-OMAT Film Processor. You are inspecting the roller
racks. Which of the following procedures do you use?
a. Replace the roller if discolored.
b. Rinse the roller with warm water.
c.
Ensure the chain tension is loose enough to remove a link.
d. Ensure the rewet roller is not touching the roller around it.
8.
Which of the following procedures is an effective method for using an algae
eliminator with the X-OMAT Film Processor?
a. Add it to the wash tank and allow the rack to remain in the solution overnight.
b. Add it to the developer tank during operation and proceed as normal.
c.
Add it to the fixer tank during operation and proceed as normal.
d. Drain all tanks at shutdown.
MD0359
2-27