Figure 6-16. Inserting 8- x 10-inch cassette in Bucky tray.
6-34. EVALUATION AND INTERPRETATION
a. Ensure that the radiographs and the data form include the following
information.
(1)
Tomographic motion.
(2)
Sweep speed.
(3)
Exposure angle.
(4)
Set cut level.
(5)
Technical factors.
b. Place the test film on the illuminator for viewing.
c. Determine the finest mesh pattern imaged, by going from the coarsest to the
finest, such as 20, 30, 40, and 50 mesh holes per inch.
NOTE:
The mesh will be in focus at the level of the cut plane.
MD0062
6-25